0
Free shipping from 33,33 £

The Third Strap guide

How to measure your dog

A well-fitting harness starts with a few careful measurements. You need a soft measuring tape, a quiet moment and your dog standing naturally. Choose your model below: the chest measuring point and strap lengths differ between designs.

Before you start

Ask your dog to stand naturally

Measure on level ground with all four paws down. Do not lift their head or stretch their body into position. If they move around, ask someone to help and take a short break.

Keep the tape close, without squeezing

Lay it flat against the body without twisting it or compressing the skin. Record the actual measurement rather than adding a few extra centimetres. Use the chart and a fitting check to assess the room needed.

Record every measurement

Repeat each measurement. Write down the result in centimetres with the strap name and harness model. Measure your dog, rather than an old harness laid flat on a table.

Escape-proof harness

Escape-proof harness — Measuring points — the numbers match the steps in the instructions.
Measuring points — the numbers match the steps in the instructions.
  1. Shoulder loopMeasure around the base of the neck, at the withers and the front of the breastbone.
  2. Chest loopMeasure around the widest part of the ribcage, a few centimetres behind the front legs.
  3. Abdominal loopMeasure around the narrowest part of the ribcage, right by the last ribs.
  4. Back strapMeasure along the back from the shoulder-loop measuring point to the abdominal-loop measuring point.
  5. Sternum strapMeasure from the front of the breastbone to the chest-loop measuring point.
  6. Abdominal strapMeasure the distance between the chest-loop and abdominal-loop measuring points.

Compare every measurement with the adjustment ranges in the chart. If your dog falls between two sizes, choose the larger one. Also check that its minimum circumferences and strap lengths still fit your dog.

Sighthound harness

Sighthound harness — Measuring points — the numbers match the steps in the instructions.
Measuring points — the numbers match the steps in the instructions.
  1. Shoulder loopMeasure around the base of the neck, at the withers and the front of the breastbone.
  2. Chest loopMeasure around the ribcage where it starts to taper. Position the measuring point to match the back-strap length of the harness size you are considering.
  3. Back strapMeasure along the back from the shoulder-loop measuring point to the chest-loop measuring point.
  4. Sternum strapThe adjustment range in the chart refers to the section of the sternum strap between the front legs. Beyond this section, it divides into two diagonal straps whose length is matched to each size.

Pay particular attention to the chest measuring point: it is different from the one used for the Y-harness. If you are unsure after purchase, send us your dog's breed and measurements and we will check the fit.

Y-harness · Basic collection

Y-harness · Basic collection — Measuring points — the numbers match the steps in the instructions.
Measuring points — the numbers match the steps in the instructions.
  1. Shoulder loopMeasure around the base of the neck, at the withers and the front of the breastbone.
  2. Chest loopMeasure around the widest part of the ribcage, a few centimetres behind the front legs.
  3. Back strapMeasure along the back from the shoulder-loop measuring point to the chest-loop measuring point.
  4. Sternum strapMeasure from the front of the breastbone to the chest-loop measuring point.

Compare every measurement with the adjustment ranges in the chart. If your dog falls between two sizes, choose the larger one. Also check that its minimum circumferences and strap lengths still fit your dog.

Limited-slip collar

Measure your dog's neck at its narrowest point, just behind the ears. This is different from the shoulder-loop measurement for a harness, taken at the base of the neck. Compare your result with the collar chart and check the collar width too.

Limited-slip collar
SizeNeck circumference behind the earscm
S 25 mm24–42
M (W) 38 mm22–40
L (G) 38 mm30–50

Measurements in cm; strap width in mm. Scroll sideways to see every column. 1 inch = 2.54 cm.

The collar ranges overlap. The size letter alone is therefore not enough: check both the circumference and width of the specific option.

View product

Three common measuring mistakes

Using one chest measurement for every model

The widest part of the chest is the right measuring point for our Y-harness and escape-proof harness. For the sighthound harness, measure where the ribcage starts to taper.

Measuring the neck in the same place every time

For harnesses, measure at the base of the neck. For the limited-slip collar, measure the narrowest point just behind the ears. Do not use one result for both products.

Ignoring strap lengths

The circumferences may fit while the chest loop still sits too close to the legs. Back-strap length mattrs just as much as the loop's adjustment range.

Got your measurements? Compare the designs, check the complete size charts and work through the fitting checklist.

How to choose a dog harness

Join our newsletter

Join The Third Strap and get 5% off your order.

The Third Strap